Lausanne
A quilted jacket without fastenings, with a shawl collar, a tie belt and pockets in the side seams. Thin jacket fabric over 100 g insulation, fully lined. Seven sizes, twenty-eight steps.
Get the pattern ▶Watch tutorial Follow @fabrico.design
XS–XXXL Sizes included
2.36–2.70 m Main fabric, by size
12 Pattern pieces
28 Steps to sew it
Pattern descriptionA quilted jacket with a shawl collar
Lausanne has no fastenings: it wraps at the front, with a shawl collar and a belt held in loops at the side seams. The fronts, sleeves and back are quilted along straight lines over thin insulation.
The pockets are sewn into the side seams, and the jacket is fully lined. The pattern is drawn for a woman's height of 170 cm (66.9 in).
MaterialsWhat you'll need
Recommended fabrics
- Thin insulation, 100 g
- Thin jacket fabric with a density of no more than 150 g
- Thin and sharp Microtex needles and a special presser foot with a sliding sole for the jacket fabric
- Very sharp pins, placed only within the seam allowances, as pin marks might remain on the fabric
Supplies
- Main fabric
- Lining fabric
- Insulation
- Interfacing: 10 cm (3.94 in) with a width of 150 cm (59 in)
Fabric consumption by size (m / in), fabric width 1.4 m (55.12 in)
| Size | XS EU 36 | S EU 38 | M EU 40MOST PICKED | L EU 42 | XL EU 44 | XXL EU 46 | XXXL EU 48 |
|---|---|---|---|---|---|---|---|
| Main fabric width 140 cm | 2.36 m 92.9″ | 2.42 m 95.3″ | 2.47 m 97.2″ | 2.53 m 99.6″ | 2.58 m 101.6″ | 2.64 m 103.9″ | 2.70 m 106.3″ |
| Lining fabric width 140 cm | 1.45 m 57.1″ | 1.50 m 59.1″ | 1.55 m 61″ | 1.60 m 63″ | 1.64 m 64.6″ | 1.69 m 66.5″ | 1.74 m 68.5″ |
Measurements of the finished product
Women's height 170 cm (66.9 in)
| Measurement | XS EU 36 | S EU 38 | M EU 40MOST PICKED | L EU 42 | XL EU 44 | XXL EU 46 | XXXL EU 48 |
|---|---|---|---|---|---|---|---|
| Back length | 67.8 cm 26.7″ | 68.3 cm 26.9″ | 68.8 cm 27.1″ | 69.3 cm 27.3″ | 69.8 cm 27.5″ | 70.3 cm 27.7″ | 70.8 cm 27.9″ |
| Shoulder length + sleeve length | 71.5 cm 28.1″ | 72.2 cm 28.4″ | 72.9 cm 28.7″ | 73.6 cm 29″ | 74.3 cm 29.2″ | 75.0 cm 29.5″ | 75.6 cm 29.8″ |
| Back width under armhole | 57.3 cm 22.5″ | 59.3 cm 23.3″ | 61.3 cm 24.1″ | 63.3 cm 24.9″ | 65.3 cm 25.7″ | 67.3 cm 26.5″ | 69.3 cm 27.3″ |
All our patterns already contain 1 cm / 0.39 in seam allowances.
Cutting listPattern pieces names
| Pattern piece | Pcs. |
|---|---|
| Main fabric | |
| 1 - Front | 2 |
| 2 - Back | 1 |
| 3 - Shawl collar | 2 |
| 4 - Shawl collar facing | 2 |
| 5 - Belt | 1 |
| 6 - Back facing | 1 |
| 7 - Loop | 2 |
| 8 - Sleeve | 2 |
| Lining fabric | |
| 9 - Front | 2 |
| 10 - Back | 2 |
| 11 - Sleeve | 2 |
| 12 - Pocket piece | 4 |
Layout of parts on fabric
Main fabric and lining, smallest and largest size, height 170 cm (66.9 in).
Main fabricLayout width 1.4 m (55.1 in)
Size XS
Size XXXL
Lining fabricLayout width 1.4 m (55.1 in)
Size XS
Size XXXL
Step by stepDescription of tailoring
28 steps in six stages, from the quilting lines to the belt.
Quilting and pockets
5 steps- 1
Mark the straight quilting lines with chalk on the cut pieces of the fronts, sleeves and back. Cut out insulation with a margin of 3-5 cm around the edges, pin it to the wrong side of the front / back.
- 2
Quilt along the lines. If desired, fix the insulation around the perimeter of the parts. Cut off excess insulation.
- 3
Pin the pocket piece to the front right sides together. Stitch them. Fix the allowances onto the pocket piece with a finishing line. Cut the insulation from the allowances.
- 4
Pin the pocket piece to the back right sides together. Stitch them. Fix the allowances onto the pocket piece with a finishing line. Cut the insulation from the allowances.
- 5
Pin the back and the fronts along the shoulder edges right sides together. Stitch them. Cut the insulation from the allowances.
Sleeves, side seams and belt loops
6 steps- 6
Pin the sleeve into the open armhole right sides together, matching the notches. Stitch in. Cut the insulation from the allowances.
- 7
Cut out the pieces of the belt loops (2 pcs.) 13 cm (5.12 in) by 4 cm (1.57 in) each. Pin along the long edge and turn it to the right side.
- 8
Pin the side edges of the sleeve, front and back right sides together. The quilt lines need to be aligned. Tip! Pin closer to the line of the future seam, so it will be more accurate, and the layers will not shift under the machine's foot. Pin together the pocket pieces.
- 9
Pin the belt loops along the notches.
- 10
Stitch the side edges of the sleeve, front, back and pocket piece with one continuous line. Cut the insulation from the allowances.
- 11
Place bartacks at the edges of the pocket entrance.
Shawl collar
4 steps- 12
Pin the insulation to the wrong side of the shawl collar. Stitch the insulation around the perimeter of the shawl collar. Pin the shawl collar pieces along the short edge right sides together. Stitch them. Cut the insulation from the allowances.
- 13
Pin the shawl collar facing pieces along the short edge right sides together. Stitch them.
- 14
Pin the shawl collar and the facing along the inner arc and short edges right sides together. Stitch them. Cut the insulation from the allowances. Snip off the corners.
- 15
Pin the shawl collar to the garment along the notches right sides together. Stitch them. Cut the insulation from the allowances.
Lining
6 steps- 16
Lining. Pin the back pieces along the central edge right sides together. Stitch them. Press the allowances open.
- 17
Form an inverted pleat on the back. Pin it together.
- 18
Pin the neckline facing to the back right sides together. Stitch them. Fix the allowances onto the back with a finishing line.
- 19
Pin the fronts and the back along the shoulder edges right sides together. Stitch them.
- 20
Pin the sleeve into the open armhole. Stitch in. Press the allowances onto the sleeve.
- 21
Pin the side edges of the sleeve, front and back right sides together. Stitch them. Press it. Do not forget to leave a hole in the side edge of one of the sleeves for turning out.
Joining the lining and the jacket
5 steps- 22
Fold the bottom edge of the jacket sleeve. Pin the bottom edges of the sleeve of the lining and the sleeve of the garment right sides together. Stitch them. Cut the insulation from the allowances.
- 23
Pin the garment and the lining along the bottom edge right sides together. Stitch them. Cut the insulation from the allowances.
- 24
Pin the lining to the garment to the shawl collar seam. Pin the shawl collar along the notches, fold the bottom of the garment and pin it over the shawl collar. Stitch them. Cut the insulation from the allowances.
- 25
Tack shoulder seams to allowances. Tuck and fix the bottom of the product along the line of the side seam. Hand stitch the bottom of the garment to the lining with a catch stitch (also you can stitch on a sewing machine right to the quilt line).
- 26
Turn the garment to the right side. Close the hole for turning out with an invisible seam or on a sewing machine.
Belt
2 steps- 27
Belt. Iron interfacing to the belt (half of the belt) as follows: cut out a piece of cotton fabric for half of the belt. Iron woven interfacing to the piece. Stitch the interfacing piece halfway to the belt at a distance of 0.5 mm from the edge (do not stitch at the bend).
- 28
Pin the belt right sides together. Stitch the short and long edges. Leave a hole in the long edge for turning out. Trim the allowances of the interfacing piece. Turn the belt out to the right side and close the opening with an invisible stitch or machine stitch.
Finishing Your jacket is ready!
Drag to explore the full layout
