Amur
A long sleeve, straight-cut thermal shirt with set-in sleeves and piping around the neck. Four pattern pieces and eight steps.
Get the pattern ▶Watch tutorial Follow @fabrico.design
40–54 Sizes included (S–5XL)
1.35–1.55 m Main fabric, by size
4 Pattern pieces
8 Steps to sew it
Pattern descriptionA thermal base layer for the top
Long sleeve straight cut shirt with set-in sleeves and piping around the neck.
MaterialsWhat you'll need
Suggested materials
- Thermal fiber, knitted fabrics with high elasticity, with viscose and polyester in the composition, rib knit
- Fabric width used throughout this tutorial — 1.50 m (1 5⁄8 yd)
Also needed
- Interfacing tape — 30 cm (12″)
Fabric requirement by size, for fabric width 1.50 m (1 5⁄8 yd)
| Size | 40–42 S–M | 44–46 L–XLMOST PICKED | 48–50 2XL–3XL | 52–54 4XL–5XL |
|---|---|---|---|---|
| Main fabric | 1.35 m 1 3⁄8 yd | 1.40 m 1 ½ yd | 1.50 m 1 5⁄8 yd | 1.55 m 1 3⁄4 yd |
Pattern pieces already include seam allowances. When purchasing fabric, please account for shrinkage and buy 5–10% more than required.
Cutting listSpecification
| Pattern piece | Pcs. |
|---|---|
| Main fabric | |
| 1 — Front with a fold | 1 |
| 2 — Back with a fold | 1 |
| 3 — Sleeve | 2 |
| 4 — Neck band | 1 |
Pattern pieces — tap to zoom in
Interfacing Shoulder cuts and back pieces (2).
Total ease allowances Chest 2 cm (¾″), waist 12 cm (5″), hips 0 cm, shoulder 2 cm (¾″).
Step by stepSewing instructions
Eight steps in two stages, from the neckline to the final press.
Neckline
4 steps- 1
Place the front (1) on the back (2) face to face and stitch the shoulder seams. Iron the seam allowances onto the back.
- 2
Iron the neck band (4) lengthwise and in half with the wrong side inward.
- 3
Stitch the neck band into a ring face to face. Press the seam allowances apart.
- 4
Place the neck band face to face with the neckline of the long sleeve sweatshirt and sew it on. Fold the neck band back and press.
Assembly
4 steps- 1
Sew the sleeve (3) into the open armhole, to do this, fold the sleeve cap with the armhole of the long sleeve sweatshirt face to face and stitch. Press the seam allowances onto the sleeve.
- 2
Fold the long sleeve sweatshirt face to face and stitch the sleeve and side seam with one seam. Press the seam allowances onto the back.
- 3
Press the bottom of the sleeve and the bottom of the garment to the wrong side, overcast and stitch with a double needle or on a coverstitch machine. Press.
- 4
Press the finished long sleeve sweatshirt.
Finishing The long sleeve sweatshirt is ready!
Drag to explore the full layout
