Verona womens -overal sewing
Fabric recommendations
We sewed a jumpsuit of a warm dense Jersey. The recommended fabric for
jumpsuit sewing is a tight knit.
Any thin jersey will work for the lining.
For cuffs kashkorse or ribbing is suitable.
Fabric сonsumption (cm / in)
| Size | XS (36) | S(38) | M(40) | L(42) | XL(44) |
|---|---|---|---|---|---|
| Main fabric (with a fabric width of 180cm/70,9in) | 158/62,2 | 165/65 | 172/67,7 | 179/70,5 | 186/73,2 |
| Lining fabric | 42/16,5 | 42,16,5 | 42/16,5 | 42/16,5 | 42/16,5 |
| Cuff Fabric | 16/6,3 | 16/6,3 | 16/6,3 | 16/6,3 | 16/6,3 |
Supplies
Main fabric;
Lining fabric for the hood;
Cuff fabric;
Eyelets – 2 pieces;
Zipper 60 cm (23.6 in);
Zipper 16 cm (6.3 in) – 2 pieces;
Cord for the hood.
Required pieces
Main fabric
| № | Pattern pieces names | Number of patterns | Number of pieces |
|---|---|---|---|
| 1 | Back | 1 | 2 |
| 2 | Front | 1 | 1 |
| 3 | Front facing | 1 | 2 |
| 4 | Gusset | 1 | 1 |
| 5 | Sleeve | 1 | 2 |
| 6 | Neck back facing | 1 | 1 |
| 7 | Hood | 1 | 2 |
| 8 | Outer pocket piece | 1 | 2 |
| 9 | Inner pocket piece | 1 | 2 |
| 10 | Pocket faking | 1 | 2 |
Lining fabric
| № | Pattern pieces names |
Number of patterns |
Number of pieces |
|---|---|---|---|
| 11 | Hood | 1 | 2 |
Cuff fabric
| № | Patterns |
Number of patterns |
Number of pieces |
|---|---|---|---|
| 12 | Sleeve cuffs | 1 | 2 |
| 13 | Pants cuffs | 1 | 2 |
Layout of parts on fabric
Main fabric
Size 36 (XS)
Fabric layout width – 1.8 m (70.9 in); length of fabric layout – 1.58 m (62.2 in)
Size 44 (XL)
Fabric layout width – 1.8 m (70.9 in); length of fabric layout – 1.86 m (73.2 in)
Description of tailoring
The hood. Pin the hood details
along the curved edge with the
right sides together. Stitch it.
Press.
In the same way, sew the
details of the hood from the
lining fabric.
Iron interfacing to the wrong
side of the hood to the place of
the eyelets. Install 2 eyelets on
the hood by presser machine
or make 2 loops by sewing
machine.
Pin the hood and the hood lining with the right sides together. Stitch. Turn inside out and press.
Stitch along the curved edge
on the face (right) side,
making the casing to the cord.
Thread the cord.
Iron the fusible interfacing to the wrong side of the pocket facing pieces (cut it from the main fabric 2 cm bigger than pocket frame) and piece of interfacing to the wrong side of pocket opening on the bodice.
Make markings of the pocket
frame on the bodice right side
and on the pocket facing
wrong side with tailor’s chalk.
Match the markings together
with the right sides. Pin it.
Sew pocket facing to the
bodice along the marking lines.
Mark the cut lines of the entrance to the pocket. Draw a line in the middle of the
pocket frame 1.5 cm short of the edge. Then draw lines to the corners of the
frame. Cut diagonally to the corners. Turn to the wrong side. Make a frame and
baste it. Press.
Pin the zipper with the right
side to the frame wrong side.
Baste it. Sew 0.2 inches (0.5
cm) from the edge.
Pin the pocket pieces to the zipper allowances. Please, do not confuse the pocket details: outer pocket piece to the bodice wrong sides together. Place inner pocket piece to outer pocket piece right sides together. Sew in place.
Pin the pocket pieces with the right sides and stitch them together.
Press the pocket pieces.
Assembling. Pin the back details together with the right sides along the center seam. Stitch.
Pin the front details together
with the right sides along the
crotch (from zipper mark to
inseam). Stitch it using sewing
machine. Press allowances
aside.
Pin the front and the back at
the shoulder seams with the
right sides together. Stitch and
press allowances to the back.
Pin the sleeve into the open
armhole, right sides together,
matching the notches. Sew in
and press.
Fold and pin the sleeve in half with the right sides together, pin the Front and the Back along the side edge, right sides together. Stitch it all in a time. Press.
Pin the gusset to the open
section of the Back pant leg
inseam with the right sides
together, matching the
notches. Sew in place.
Pin the Pant legs along the inseam with the right sides together. Matching the notches, pin the Gusset to the front crotch seam. Stitch it. Press.
Cuffs. Fold the cuff in half with
the right side together. Pin it.
Stitch along the short edge.
Press.
Fold the cuff in half with the
wrong side together. The
sleeve is inside out. Insert the
cuffs into the sleeve. Pin it and
stitch it gently stretching. Press
the allowances to the sleeve.
Similarly, stitch the cuff to the hem legs.
Pin the neckline facing to the
front facings with the right sides
together. Stitch it and press
allowances towards the neckline
facing. Use serger to finish the
outer edge of the neckline and
front facings together.
Pin one side of the zipper to the front with the right sides together. Pin the right side of the front facing to the wrong side of the zipper. Stitch it.
Zip up and pin another side of the zipper to the front. Make sure the neckline is similar. Unzip and pin the front facing to the zipper. Baste it if necessary. Stitch it.
Cut the zipper. Pin the hem of the front facings and stitch it. Fold the hem of the facing around zipper and stitch.
Pin the hood to the neckline
with the right sides together.
Pin the neckline facing to the
hood lining. Stitch it all together
using sewing machine.
Using hand stitch, fix the
neckline facing to the back.
The same way fix the pockets
to the front facing.
Topstitch the zipper.
