Adell girl's crop top sewing tutorial

Before sewing

The pattern of these t-shirt is suitable for elastic fabrics: light weight cotton lycra jersey, biflex fabric.

Use serger (overlock) to sew this t-shirt. In case you don’t have serger, replace it with a stretch stitch or zigzag stitch on the sewing machine.

Fabric consumption (cm / in)
(With a fabric width of 150 cm / 59.1 in)

Size 3 years
98
4 years
104
5 years
110
6 years
116
7 years
122
8 years
128
9 years
134
10 years
140
Main fabric 30
11.81"
32
12.6"
34
13.39"
36
14.17"
38
15"
40
15.75"
42
16.54"
44
17.32"

When buying fabric, keep in mind that the material can shrink, so take with a margin of 5 – 10%.

Layout of parts on fabric

Height 104, with a fabric width of 150 cm

Height 128, with a fabric width of 150 cm

Specification

Main fabric

Patterns Number of
patterns
Number of
pieces
1 Back 1 1
2 Front 1 1
3 Sleeve 1 2
4 Front yoke 1 2
5 Back yoke 1 1
6 Neckband 1 1
7 Sleeve band 1 2
8 Waistband 1 1

Attention! All our patterns already contain seam allowances.

Description of tailoring

Pin the upper front detail to the bottom front detail right sides together.

Serge it.

Press seam allowances to the upper detail.

Pin the yoke to the back detail right sides together.

Serge it.

Press seam allowances to the yoke.

Topstitch the yoke. Press seam allowances.

Pin front and back details along the shoulder edges right sides together.

Serge it.

Press seam allowances to the back.

Pin the sleeve into the open armhole right sides together, aligning the notches. Serge it. Press seam allowances.

Fold the sleeve in half right sides together.

Pin front and back along the side edges right sides together. Serge it.

Press seam allowances to the back.

Fold sleeve band in half right sides together.

Serge its short edges.

Fold sleeve band in half its long sides and press it.

Pin the sleeve band into the bottom of the sleeve right sides together. Serge in place. Press seam allowances to the sleeve.

Pin the placket to the wrong side of the sleeve, with the right side exactly to the cut line.


(Important! Pin the placket to the line, which is closer to the front). Stitch it.

Slash along the line, not reaching 1.5 cm (0,59″) to the edge. Then cut towards the corners of the frame. Turn to the right side.

Fold the edging allowances; pin, align and stitch the edging and the triangle of the frame together. Press it.

Top stitch the edging 0.1 cm (0.04″) from the fold.

Fold the placket, pin it and give it the desired shape. Top stitch 0.1 cm (0.04″) from the edge. Press it.

Patch pocket.

Press the pocket allowances. Fold the top of the pocket along the fold line, fold and pin the allowances.

Stitch the top of the pocket. Turn out and press it.

Baste the pocket allowances, mark the pocket lines on the front with chalk and pin the pocket. Baste if needed. Stitch the pocket. Press it.

Pin the right side of one yoke to the right side of the back and pin the right side of the other yoke to the wrong side of the back. Stitch it. Fix the allowances to the upper yoke with a finishing stitch.

Press it.

Pin the fronts and the upper yoke of the back along the shoulder edges right sides together.

Roll up the fronts and the back. Cover the resulting roller with the bottom yoke and pin the shoulder edges. Stitch them.

Turn the back and the fronts to the right side. Press it.

Top stitch 0.1 сm (0.04″) from the seam.

Pin the sleeve into the open armhole, aligning the notches. The allowances of the sleeve are slightly larger, in order to make a welt seam later. Stitch the sleeve. Press the allowances onto the front and the back.

Turn up the sleeve allowance by 0,5 cm (0,2″) and pin it. Baste it. Stitch the allowances 0,5 cm (0,2″) from the seam. Press it.

Pin the side edges of the sleeve, front and back wrong sides together. Stitch 0,5 cm (0,2″) from the edge. Trim the allowances by 0,3 cm (0,12″). Turn inside out. Press it.

Pin the side edges of the sleeve, front and back wrong sides together. Stitch 0,5 cm (0,2″) from the edge. Trim the allowances by 0,3 cm (0,12″). Turn inside out. Press it.

Press the allowance on one side of the front placket. Pin the right side of the placket to the wrong side of the front. Stitch it. Press the allowance onto the placket.

Press the placket in half, cover the stitching seam by 0,1 cm (0,04″) and pin the placket. Stitch it.

Pin the pleat on the sleeve. On the cuff, press the allowance on one long side. Pin the other edge to the bottom of the sleeve, leaving 1 cm (0,39″) on the cuff. Stitch it. Press the allowances onto the cuff.

Pin the short edges of the cuff right sides together. Stitch, not reaching 1 cm (0,39″) to raw edges. Turn inside out. Press it.

Fold the pressed edge and pin, overlapping the line by 0.1 cm (0,04″). Stitch it. Press it.

Top stitch it.

Collar. Press the lower allowance on one stand. Pin the parts of the stand along the upper edge up to rounded places and stitch. Press the allowances onto the lower stand.

Pin the lower stand to the neckline of the shirt right sides together, aligning the notches. Stitch in. Press the allowance onto the stand.

Pin the stands right sides together and stitch the rounded places. Clip the allowances. Turn inside out. Press it.

Pin the pressed edge of the stand to the neckline so that the upper stand overlaps the seam by 0,1 cm (0,04″). Baste it. Stitch, laying the line on the right side into the seam.

It is better to start from the middle of the back. Press it.

Fold the bottom hem of the shirt twice and top stitch.

Sew buttonholes and buttons.

The shirt is ready!

Thanks for sewing with us!
Follow us on Instagram: @fabrico_patterns