Skip to content
Florence — PDF Pattern + Tutorial
PDF Pattern Women's Dress

Florence

A square-neckline dress with a button-front placket, adjustable straps, a fitted bodice, and a gathered skirt with side seam pockets.

Florence women's button-front dress worn by a model
XS–2XL Sizes included
1.6–1.85 m Main fabric (63–73")
0.5 m Interfacing (19.7")
10 Buttons needed

A button-front summer dress

A fitted-bodice dress with a square neckline, adjustable straps, and a row of buttons down the front placket. The gathered skirt falls to a midi length with pockets set into the side seams.

Cut from natural, blended, or synthetic dress fabrics, this pattern is sized for XS to 2XL.

What you'll need

Suggested fabrics

Natural fabrics such as cotton, satin, denim, or jacquard; blended fabrics like cotton with polyester; or synthetics such as polyester, or polyester with elastane.

Also needed

  • Main fabric — 1.6–1.85 m (63–73"), length by size, see table below
  • Interfacing — 0.5 m (19.7")
  • Buttons — 10 pcs
  • Threads
  • Seam allowances of 1 cm (0.39") are already included on every pattern piece

For fabric width 1.4 m (55.1")

Sizes XS S MMOST PICKED L XL 2XL
Main fabric 1.60 m
63"
1.65 m
65"
1.70 m
67"
1.75 m
69"
1.80 m
71"
1.85 m
73"

Pattern pieces already include seam allowances. When buying fabric, add a 5–10% margin in case of shrinkage.

Cutting list

Specification

Pattern pieceQty
1 — Back facing1
2 — Front facing2
3 — Back strap4
4 — Front strap4
5 — Pocket piece4
6 — Center back1
7 — Side back2
8 — Side front2
9 — Center front2
10 — Back skirt1
11 — Placket2
12 — Front skirt2
Interfacing Iron the interfacing to the facing pieces (1, 2), both plackets (11), and the pocket opening.
Step by step

Sewing instructions

Bodice

5 steps
  1. 1

    Cut out all the pattern pieces. Iron the interfacing to the facing pieces, both plackets, and the pocket opening.

  2. 2

    Pin the facing pieces right sides together along the short edge and stitch. Press the allowances open.

  3. 3

    Pin the back center panel to the back side panels, right sides together, and stitch. Serge the allowances and press them toward the side panels.

  4. 4

    Pin the front center panel to the front side panels, right sides together, and stitch. Serge the allowances and press them toward the side panels.

  5. 5

    Pin the front and back together along the side edge, right sides together, and stitch. Serge the allowances and press toward the back.

Straps

3 steps
  1. 1

    Pin the front strap to the back strap, right sides together, along the short edge — match the notch marks to connect them correctly — and stitch. Press the seam allowances open.

  2. 2

    Pin the strap pieces right sides together and stitch lengthwise along both sides. Press the seam allowances, turn the straps right side out, and press again.

  3. 3

    Pin the straps to the front and back along the notches and sew in place.

Facing & pockets

3 steps
  1. 1

    Serge the facing's bottom raw edge. Pin the facing to the garment's upper hem, right sides together, baste if needed, and stitch.

  2. 2

    Turn the garment right side out and topstitch.

  3. 3

    Pin the pocket pieces to the front and back skirt panels, matching the notches, and stitch at 0.5 cm (0.2").

Skirt & gathering

3 steps
  1. 1

    Pin the front and back skirt pieces together, right sides together, and pin the pocket pieces together. Stitch it all together, then serge the allowances and press.

  2. 2

    Pin the bodice and skirt together, right sides together — start at the side seam, then pin the skirt center and bodice center. Gather the skirt and baste it in place.

  3. 3

    Stitch the bodice and skirt together, then serge the allowances.

Placket & finishing

3 steps
  1. 1

    Serge one long edge of the placket. Pin the placket to the front and sew in place. Press the allowances toward the placket.

  2. 2

    Serge the skirt hem, fold it, then stitch and press.

  3. 3

    Fold the placket inward and pin it, then topstitch with two parallel lines of stitching. Press.

Mark the buttonhole and button placement, sew the buttonholes, and sew on the buttons — your dress is ready!
💬