New York
A children's elongated, double hat — a two-sided version can be made.
An elongated double hat
Children's elongated, double hat — a two-sided version can be made.
Cut from a stretchy knit or fleece, with thin jersey for the lining, this pattern is sized 1 to 9 years.
What you'll need
Suggested fabrics
For sewing a hat, we recommend using knit fabrics that have good stretch. Fleece is also suitable.
Use thin jersey for the lining.
Also needed
- Main fabric — 30–35 cm (11.8"–13.8"), length by size, see table below
- Lining fabric — 30–35 cm (11.8"–13.8"), length by size
- Seam allowances of 0.7 cm (0.27") are already included on every pattern piece
For fabric width 1.5 m (59.1")
| Size | 1 – 3 years | 6 – 9 years |
|---|---|---|
| Main fabric | 30 cm 11.8" |
35 cm 13.8" |
| Lining fabric | 30 cm 11.8" |
35 cm 13.8" |
Pattern pieces already include a 0.7 cm (0.27") seam allowance for all edges. The fabric use does not include possible shrinkage — please account for shrinkage and buy 5–10% more than required.
Specification
| Pattern piece | Qty |
|---|---|
| Main fabric | |
| 1 — Top of the hat | 1 |
| Lining fabric | |
| 2 — Lining of the hat | 1 |
Ready to print and tape together
Sewing instructions
Assembly
6 steps- 1
Place the top of the hat and lining of the hat right sides together, pin and stitch on the overlock.
- 2
Stitch the center seam using an overlock, leaving an opening for turning. Press the seam.
- 3
Stitch the darts on the front with an overlock, press and ease the fullness.
- 4
Stitch the rounded edges of the beanie with an overlock, and press the seams.
- 5
Turn the beanie right side out through the opening, and hand-stitch the opening closed.
- 6
Fold the beanie in half along the fold, and press the top and the fold.